Led Strip 20 metres 520W 58,000 Lumen DC 24V IP20 PCB 10mm Coil 4800 smd 2835 Samsung S2

DESCRIPTION

• 20m Strip with 4800 Samsung S2 LEDs, model with closely spaced LED chips
• Supply Voltage DC 24V (Power supply not included)
• Dimmable and Cuttable LED Strip, every 6 LEDs (25mm)
• Nominal Power 520W per Roll / Consumption Power 23.2W/m
• Nominal Lumen 58,000lm per Roll / Actual Lumen 2500lm/m
• 20-meter Roll
• Professional Use
• Power feed every 10m maximum, for longer lengths, power at multiple points.

20-meter 2835 LED Strip, mounted on 3M adhesive.
240 LEDs/m, (4800 total LEDs) this LED strip is cuttable every 6 LEDs (25mm).

This model of LED strip is characterized by having Samsung S2 model 2835 LEDs.
Thanks to this feature, it is excellent for installation in shops, boutiques, and places where a lot of light is needed. Also, due to the density of the LEDs, the light is uniform and continuous.
 
Connecting multiple LED strips must be done in parallel.
For installation, the use of aluminum profiles for heat dissipation is necessary.

TECHNICAL SPECIFICATIONS 

PCB Width 10mm 
PCB+SMD Height 2mm 
Roll Length 20m 
Supply Voltage DC 24V 
Nominal Power 520W 
Consumption Power 23.2W/m 
Nominal Lumen 58,000lm 
Actual Lumen 2500lm/m 
Kelvin 2700K / 4000K / 6500K 
Color Rendering Index (CRI) 85+ 
LED Type 2835 x 4800pcs 
Cuttable Every 6 LEDs / 25mm 
IP20 Waterproof 
Dimmable YES 
Operating Temperature -20° to +40° Degrees 
Certifications CE / RoSH / TUV / UL on request 
3 Years Warranty 

CORRECT INSTALLATION

To ensure the maximum performance in terms of brightness and durability, installation on a dedicated aluminum profile, designed for proper heat dissipation, is mandatory.

The aluminum profiles not only dissipate heat but also protect the LED strips from dust, insects, and partially from humidity.

CORRECT POWER SUPPLY

LED strips must be powered by a constant voltage power supply, usually marked with DC.

For 48V LED strips, a DC 48V power supply is required.

Remember that 48V LED strips powered from one end can reach a maximum length of 5m. To achieve longer lengths, it is mandatory to power the strip from both ends or in sections of 5m.

Always use a power supply with higher wattage than the LED strip's power.

DIMMING

To adjust the brightness of an LED strip, it is necessary to use a suitable controller.

You can dim LED strips with a WiFi controller, a button controller, or through voice control with Alexa or via Smartphone.