RGB+CCT Led Strip 144W 24V IP54 PCB 12mm Multicolour and Dual White

Waterproof RGB + CCT Led strip with IP54 protection degree, colored light plus dynamic white light, with power supply voltage DC 24V 144W.

Strip Led Dimmable and Cuttable to every 18 Led (100mm). This led strip has a nominal power of 14W per coil / Power Consumption 28.8 W / mt (14.4W / mt RGB, 14.4W / mt White).

Led strip with led chip 5050 (RGB) and 2835 (white light) 5 meters long with 900 LEDs (180 led / mt) with 12mm wide PCB.

By means of a Mi-Light controller (sold separately) you can create all possible colors, up to 16 million colors, or set the White light temperature you prefer (You can set natural, warm and cold light).
Thanks to this led strip you can create excellent colorful environments or light effects.

The connection of several Led strips must be carried out in parallel.
For installation it is necessary to use aluminum profiles for dissipation.

Power supply not included!

Warning: If you cut the strip this coil loses its IP54 waterproof rating

DATA SHEET:

Led number: 900 (180 led / mt)
Rated power: 144W (28.8W / mt)
Power supply voltage: DC24V
Dimmable: Yes
Led type: SMD5050 + SMD 2835
Nominal Luminous Flux: Only White Light 8000lm (1600 Lm / mt)
Efficiency: 110 lm / W
Color Temperature: CCT 2700K - 6500K (variable)
Light angle: 120 °
Color rendering index: 80+
Strip length: 5000mm
Width: 12mm
Cutting segment: 18 LEDs / 100 mm
Height: 2mm
PCB color: White
Protection: IP54
Certificates: TUV, RoHS
Warranty: 3 Years

CORRECT INSTALLATION

To ensure maximum performance in terms of light output and duration, installation on a special aluminum profile is mandatory, designed for correct heat dissipation.

The aluminum profiles not only dissipate heat, but also protect the LED strips from dust, insects and partially moisture.

PROPER NUTRITION

The LED strips must be powered with a constant voltage power supply, usually with the DC symbol. A DC 24V power supply is required for the 24V led strips.

To calculate the required wattage of the power supply to buy for your led strip, just do a simple mathematical multiplication:

"N ° meters of led strip x Watt per meter absorbed by the strip model = Essential power of the power supply"

Warning: Always buy a slightly more powerful power supply for the result obtained, otherwise your power supply would always work at full load and you would risk burning it.

"Ex: You have 3 meters of 20W LED strip per meter and you want to buy a power supply, the operation to be done will be this: 20 W x 3mt = 60W total absorption for 3 meters of LED strip. You will therefore need a power supply unit of at least 100W "

Remember that the 24V led strips, powered at one end, can reach a maximum length of 5m. To reach higher lengths it is mandatory to feed the strip to both ends or in 5m sections.

Always use a power supply with a power greater than the power of the led strip.

DIMMERATION

To adjust the light intensity and the color of the light of a LED strip it is necessary to use a suitable controller.

You can dim the LED strips with a WiFi controller, from the Button, use Alexa's voice control, remotely manage via Smartphone and also set a timer.