High-Efficiency LED Strip Series 520W 72000lm 24V IP20 PCB 10mm 3200 SMD 2835 Roll

LED Strip with 2835 LED chips, 20 meters in length, mounted on 3M adhesive.

160 LEDs per meter (total of 3200 LEDs).

This LED strip is cuttable every 8 LEDs (50mm).

This model is one of the most powerful LED strips ever designed and can easily replace traditional LED tubes.

Suitable for illuminating shop windows or stores.

Multiple LED strips should be connected in parallel. Aluminum profiles for heat dissipation are required for installation.

Technical Specifications:

PCB Width: 10mm

PCB+LED Height: 1.5mm

Coil Length: 20,000mm (20 meters)

Power Supply: DC 24V

Nominal Power: 130W per coil

Effective Power: 23.9W per meter

Nominal Lumen: 72,000lm per coil

Effective Lumen: 3540lm per meter

Kelvin (Color Temperature): 3000K / 4000K

Color Rendering Index (CRI): 80+

LED Type: 2835 x 3200 pieces

Cuttable Every 8 LEDs / 50mm

IP Rating: IP20

Dimmable: Yes

Operating Temperature: -20°C to +40°C

Certifications: CE / RoHS / TUV / UL upon request

Warranty: 3 Years

How to Install a 24V LED Strip:

To ensure maximum performance in terms of brightness and durability, it is mandatory to install it on a dedicated aluminum profile designed for proper heat dissipation.

Aluminum profiles not only dissipate heat but also protect LED strips from dust, insects, and partial moisture.

Choosing the Right Power Supply for the LED Strip:

LED strips must be powered by a constant voltage power supply, usually denoted as DC. For 24V LED strips, you need a 24V DC power supply.

To calculate the required wattage for your LED strip's power supply, use this simple mathematical formula:

"Number of meters of LED strip x Watts per meter consumed by the LED strip model = Minimum power requirement of the power supply."

Note: Always buy a power supply slightly more powerful than the calculated result; otherwise, your power supply will operate at full load continuously and could risk overheating.

Example: If you have a 3-meter LED strip with 20W per meter and want to buy a power supply, the calculation would be: 20W x 3m = 60W total power consumption for 3 meters of LED strip. So, you will need a power supply of at least 100W.

Remember that 24V LED strips, when powered from one end, can reach a maximum length of 5 meters. To achieve longer lengths, it's mandatory to power the strip from both ends or in sections of 5 meters each. Always use a power supply with a higher wattage than the LED strip's power.

How to Dim an LED Strip:

To adjust the brightness of an LED strip, you need a suitable controller.

You can dim LED strips using a WiFi controller, a button controller, voice control via Alexa, remote control via smartphone, and even set timers.